Mandik Climatix, Руководство по эксплуатации

Страница: 64 / 83

KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
www.mandik.cz
64

Press – used to sense the air pressure and the amount of air in the duct supplied by
the fan. The AssignmentInputs/Outputs

Fans displays the assignment of a
separate input for the pressure sensor and flow sensor.

Direct – fixed voltage value of the required speed 0-10V. The fan speed is set to this
value converted to a percentage of 0-100%.

POLv1 – six-step speed value entered from the POL822 room unit within the range of
values for MinSpeed and Comfort is used to control the fan speed

POLv2 – linear % speed value entered from the POL822 room unit within the range of
values for MinSpeed and Comfort is used to control fan speed.

AMR – fan speed control is controlled by a linear % speed value entered from the
AMR-OP70 or AMR-OP41 room unit within the range of values for MinSpeed and
Comfort .

BackupFans ( No / Supply / Extract / Both ) – activates the backup fans when the main fans fail:

Supply – backup supply fan is activated when the supply fan fails.

Extract – the exhaust fan fails, the backup exhaust fan is turned on.

Recuperation ( No / Plate / Rotary / Glycol / RotaryFbk ) – specifies the type of recuperator used
and its characteristics:

Plate – plate recuperator with bypass damper without monitoring its position.

Rotary – rotary recuperator with frequency converter controlled by digital and
analog controller outputs or stepper motor.

Glycol – recuperation implemented by a glycol circuit.

RotaryFbk – rotary recuperator with a sensor monitoring the recuperator speed.

WaterHeating ( No /1/2 ) – selection of the number and function of water heating:

1 – selection of standard water heating or in the preheating function. Temperatures
are configured for this water heating in HeatWaterTemperature .

2 – selection of the water heating in the preheating function. Temperatures are
configured for this water heating in 2HeatWaterTemperature .

Boiler ( No / Yes ) – control of the boiler room to prepare heating water for water heating.

ElectricalHeating ( No /1/2 ) – selection of the number and function of electric heating:

1 – selection of standard electric heating or in preheat function.

2 – selection of electric heating in the preheating function.