Man D 2840 LE 403, Руководство по эксплуатации

Страница: 28 / 70

Commissioning and operation
28
ALARMS: Standard function: Calling up the alarm screen; the five alarms or
warnings last issued and still present are displayed. At the top left of
the monitor is the code A1. If there are more than 5 messages issued,
the messages can be displayed in groups of five by pressing the key
again. The page number is indicated in the top left with A1 to Ax. If the
display jumps to the 1st alarm screen or the display remains un-
changed when the key is pressed, no more messages are active.
Special function: Holding the key for at least 5 seconds activates the
built-in configuration menu. There, the language, units, date and time
can be set.
Menu function: Within the menu, this key has a cancel function (Esc).
The program moves back by one menu level and / or from the main
menu to the normal display function.
Menu functions
By holding the “ALARMS” key (for at least 5 seconds), you enter the configuration menu.
The keys are now given the significance described at “
Menu function ”. The new alloca-
tion is shown in the bottom line in continuous black:
Escape function
Cancel
Move function
Move selection cursor
Enter function
Accept setting
esc(Men) move(+/–) enter(Prg)
Menu guidance is in English and cannot be changed. You first enter the main menu,
where the language and units for measurement point designations and measured values
can be selected. There are also additional sub functions for time setting (set-time), as
well as service functions, incl. PC communication (service). Each current selection can
be cancelled using the Escape function (menu key
ALARMS
M en
). All other previously made set-
tings are not influenced by this.
Selection of language and units
When the menu is opened, the current settings are shown highlighted in black. A flashing
selection cursor marks the language currently set (e.g. English):
English German French Italian Spanish
> (US/GB) < (D) (F) (I) (E)
ALARMS
M en