Commissioning and operation
51
3. Command takeover:
Execution:
−
Press “Command” key once again for confirmation of command re-
quest.
Consequence:
−
Display “Alarm” (red) goes out on all control stands.
−
Acoustic signal transmitter remains silent on all control stands.
−
“Command” display shows continuous light on the command master in
command.
On all other command masters, the “Command” display is off.
The command is now at this control stand. The control system is ready for operation
(standby).
Command change between control stands
For a command change to a different control stand, there are two variants which have to
be set using DIP switch I-2 in the setting unit. Command change with
lever comparison
or
free
command change.
Please ask your MAN agent.
Command change with lever comparison
The control system compares the lever positions of the command masters involved in the
control stand change. A command change from one control stand to another can only
take place if the
ever of the requesting command master
is either in the ”neutral posi-
tion” or in the same travel direction position as the
lever of the command master that is
in command
.
The command change for this variant takes place in two steps.
1. step: Command request on the selected control stand.
Execution:
−
Set the control lever of the command master in the takeover position
(Neutral position position or same travel direction as the command
master that is in command).
−
Press ”Command” key once to request the command on this control
stand.
Consequence:
−
The acoustic signal transmitter “beeps” in short intervals.
−
The display “Command” flashes rapidly.
The command is now requested on this control stand. The control system has enabled
the command takeover and indicates this by means of short tone and lamp intervals.
.
If the control system issues long lamp and tone intervals, the subsequent command
takeover is refused. In this case, the control levers of the command master are usually
not in the correct position or there is a fault in the system.
Содержание D 0836 LE 401
