Commissioning and operation
44
Warming Up
With the special “Warming up” function a speed can be set without the gearbox being
shifted. This function is necessary for letting the engines warm up.
To switch on the “Warming up” function press the button at the active bridge and at the
same time move the accelerator to forward or reverse. The button can then be released.
To switch off move the accelerator back to neutral. Do not press the button while you do
this.
If the “Warming up” function is active the
command lamp flashes.
Note on twin engines: The “Warming up” function can be switched on and off separately
on each side. The command lamp is allocated to the relevant accelerator.
Increased idling speed
With the special “Increased idling speed” function you can switch to a higher idling
speed. This function is necessary if the drive engine has to power a bow thruster as well
and the output at normal idling speed is not sufficient for this.
Zum To switch this function on and off press the button on the active bridge.
Danger:
Die The “Increased idling speed” function cannot be used unless it has been
set. If the function has been set the “Synchronisation” function cannot be
switched off.
Synchronisation
If in twin-engine systems the positions of the port and starboard accelerators at the ac-
tive command initiator diverge by less than 10 % in the forward range the same setpoint
(that of the port accelerator) is set automatically for both.
If the “Synchronisation” function is active
this is shown by the ”Synchro” lamp.
If this function is to be switched off press the button on the active bridge. The function is
reactivated as soon as the positions of the accelerators diverge again by max. 10 %.
Note on “increased idling speed”: It is not possible to switch off the “Synchronisation”
function if the “Increased idling speed” function is set.
Danger:
The “Synchronisation” function cannot be used unless it has been set (com-
mand initiator, Synchronisation).
COMMAND
ALARM
SYNCHRO
Command lamp flashes
COMMAND
ALARM
SYNCHRO
Содержание D 0836 LE 401
