Man D 0836 LE 401, Руководство по эксплуатации

Страница: 50 / 76

Commissioning and operation
50
Display Command L2 and L3
COMMAND
Continuous light of the “Command” display indicates which command master is currently
in command. The “Command” displays of the other control stands are disabled. If the
command is requested on this master, the “Command” display flashes.
If the command master is in the “Warming Up” function, this is indicated by a brief,
rhythmic extinguishing of the “Command” display.
The “Command” display is present on the system once (once for the port system / once
for the starboard system).
Enabling the control system with command masters
1. Switch on control system
Execution: − apply supply voltage.
Consequence: − Display “Alarm” (red) on all control stands lights up continuously.
− “Command” and Syn./Trol.” keys. On all control stands weakly
lit up (only visible in darkness).
− Acoustic signal transmitter sounds with slow intermittent tone on all
control stands.
2. Command request:
The command can be requested at any control stand. The control levers of the command
master on the requesting control stand must be set at the “Neutral-position”.
.
“Command master calibration and enable of control stands” must have been carried
out. Otherwise, the command can only be taken over at control stand 1.
Execution: − Set the control lever of the command master to the “Neutral-position”.
− Press “Command” key once for command request.
Consequence: − Display “Alarm” (red) on all control stands remains lit up continuously.
− Acoustic signal transmitter sounds with fast intermittent tone on all
control stands.
− The display “Command” flashes rapidly.
.
If the control system continues to issue long lighting and tone intervals, it is usually the
case that the control lever of a command master is not in the “Neutral position”.