Attaching and Detaching the Roll Film Holder
l
Removing the rear body cap
l
Attaching the roll film holder
By moving the slide locks (29) on both sides
fully to the left, the cap can be removed.
Never push the light baffle (26) on the
camera back after removing the rear body
cap. If the light baffle is pushed by force,
it will cause light leakage or a malfunction.
1. Before attaching the holder, confirm that
the upper and lower side slide locks (29)
are on the left end of the indented portion
when viewed from behind the camera body.
NOTE:
Should either slide lock be moved to the
right while nothing is attached to the revolv-
ing adapter, the slide lock release lever (31)
will engage and the slide lock will not move.
II this happens, press the release lever (31)
and return the slide lock to the open posi-
tion.
2. Attach the roll film holder and slide both
slide locks firmly in the direction of the arrow
mark.
If the slide lock of the revolving adapter
is not pushed fully in or out, the shutter will
not be released because of the shutter
locking safety device. Always operate the
slide lock securely.
If closing the lower slide lock is neglect-
ed, the safety device of the Pro-S holder
will prevent the dark slide from being re-
moved.
If the dark slide is completely inserted,
or if the film is not loaded, the shutter re-
lease button cannot be pressed, leading to
picture-taking failure.
16
