When the roll film holder for the former RB67 is
used on the Pro-S camera body.
Since the former roll film holder is not equipped with a
coupling device for double-exposure prevention, oper-
ate it in the same manner as if it were mounted on the
former RB67 camera body.
When the roll film holder for the Pro-S camera
body is used for the former RB67 camera body.
A l t h o u g h t h e c o u p l i n g d e v i c e f o r d o u b l e - e x p o s u r e
prevention does not function in this case, the film wind-
stop device is automatically released when the shutter
is released, and the film is ready for winding.
Other operating methods are the same as those when
using the former RB67 camera body.
When the roll film holder for the Pro-S is used
for the Mamiya Universal Press.
Use in the same manner as when the roll film holder
for
the
former RB67 is mounted on the Mamiya Universal
Press.
When the film wind-stop release lever (42) is moved to
the left, a red mark appears on the exposure counter,
the wind-stop is released, and the film is ready for
winding.
37
When film holders for the Mamiya Press are
used for the Pro-S camera body.
When using these holders, mount each holder on the
camera body back through a P-adapter and an M-
adapter.
These holders can be handled in the same manner as
if they were mounted on the Mamiya Press.
When photographing in a horizontal format, the horizon-
tal format marking lines (red lines) do not appear on the
finder. Accordingly, refer to the red lines which appear
when the revolving adapter is attached, and mark the
format with a piece of tape on the ground glass focusing
screen.
When Polaroid Land pack film is used with the
Pro-S camera body.
When using the Polaroid Land pack film holder, use a
P-adapter to mount it on the camera body back.
Compose the picture through full view of the ground
glass focusing screen. In this case, the actual picture
size will become approximately 2 3/4 x 2 3/4 in. (7 x 7cm).
