Mamiya 645DF, Инструкция по эксплуатации

Страница: 49 / 53

A
B
93 94
Using a Tripod
When using a tripod with 3/8” screw (instead of
1/4” screw) remove the small screw
from the
tripod screw hole on the bottom of the body
using a plus screwdriver, then use a coin to
remove the tripod screw adapter bushing
.
Tripod When You Think Something Might Be “Faulty”
In the conditions below or when the LCDs display the items listed in
pages 95 and 96, they are not necessarily faults. Check the camera
referring the descriptions below.
- Unable to release the shutter
Check to see if the batteries are installed. Check to see if the batteries are dead.
Check to see if the power is on (the shutter release selector lever should be set to
“
S ” or “ C ” position).
- The viewfinder does not show LCD read-outs.
Check to see if the batteries are installed. Check to see if the batteries are dead.
Check to see if the power is on (the shutter release selector lever is other than in the
“
L ” position).
Check to see if the digital back is installed.
If the camera has not operated for longer than 15 seconds, the viewfinder LCD
readouts will automatically disappear.
This camera employs a microcomputer. It is possible that the camera may
malfunction when exposed to static electricity or the like. In this case, turn OFF
the camera power and then remove the batteries. Reinstall the batteries, then
turn the power on. If the camera does not function properly after these steps,
contact our sales office or service center.