Mamiya 645DF, Инструкция по эксплуатации

Страница: 9 / 53

15 16
1. Battery life of the originally supplied batteries is dependant on storage conditions.
2. Blots and fingerprints on terminals may cause loose connection and corrosion. Wipe
the terminals before loading the batteries.
3. It is advised to carry spare batteries in remote or foreign locations.
4. Battery performance decreases in low temperatures. Keep them warm when in cold
climates or locations.
External battery case PE401 is available as an optional accessory.
5. Store the batteries in a cool and dry place, away from direct sunlight.
6. Remove the batteries from the camera body when they will not be used for a long
time.
7. Replace the batteries with new ones as soon as they are exhausted. Liquid leakage
from the battery may damage the camera.
8. Read the label warnings of the batteries for their handling.
Battery Care Battery Power
Remaining battery
charge display
The camera’s power is turned on when the drive dial is set to “ S, ” “ C ” or “ M.UP. ” In
order to prevent the camera’s battery power from draining, sleep mode is automatically
established if no operations are performed for a specific period of time while the power
is ON (with exposure metering status maintained).
The initial setting for the exposure metering status maintenance period is 15 seconds.
It can be changed at any time to a period within 30 sec., 60 sec. using the custom
settings. (C-03 on page 84)
In sleep mode, operating the shutter button or function setting button restores power
ON status.
In sleep mode, the shutter speed and f-number in the external LCDs go off, and the
icon shown in the figure is displayed. (This mark appears in program AE mode.)
For the purpose of the descriptions and explanations provided in these
instructions, it is assumed that the camera’s power is on.