Mamiya 645DF, Инструкция по эксплуатации

Страница: 12 / 53

21 22
MADE IN JAPAN
MADE IN JAPAN
2
1
Replacing the Diopter Correction Lens
If there is dirt or dust on the lens surface, remove it with a blower or sweep it off
gently with a lens brush.
If there are fingerprints or dirt on the lens surface, wipe away with a piece of clean,
soft gauze.
Using solvents could discolor the diopter correction lens frame.
2. Remove the existing diopter by sliding
downwards using the fingernail groove and
detach.
3. Insert a new diopter by aligning it to the base
of the diopter holder and sliding it upwards into
place then reattach the rubber eye piece.
Diopter Adjustment
Look through the viewfinder and make sure that the focus frame (Rectangle with
Circle) is in sharp focus. If it is not, turn the diopter adjustment dial in the “–” direction
if you are nearsighted, in the “+” direction if you are farsighted. If this is not sufficient
you may require an optional diopter correction lens. See below.
Point the camera at a bright, plain object such as a white wall when making this
adjustment.
Diopter matching. Diopter not matching.
Range of adjustment of diopter
correction lenses (Optional accessory)
Diopter correction lens Range of adjustment
DE401 (standard) -2.5 to +0.5
DE402 (for nearsighted users) -5.0 to -2.0
DE403 (for farsighted users) 0 to +3.0
1. Remove the rubber eye piece by sliding
upwards.