Mamiya 645DF, Инструкция по эксплуатации

Страница: 11 / 53

19 20
1
2
3
3
2
1
A
B
Detaching the digital back
When detaching the digital back, pull back the
detachment lever (found on the right side on ZD
backs) or press the release button (found on
the left side of M series backs) and pull away
from the camera body.
When detaching the digital back from the
camera body, the shutter will automatically
fire, the mirror will go to the upper position
and the shutter curtain will open, leaving the
camera locked.
2. Rest the digital back on the lower ledge of
the camera body so the camera body contact
pins and digital back contact pins meet. Hold
the digital back lever open (on the right side of
ZD backs) or hold down the release button (on
the left side of M series backs) then press the
upper part of the digital back
to the camera
body . A click will be heard as the shutter is
released, signaling that the back has been
correctly mounted.
Automatic setting of shutter
To protect the shutter curtain, when detaching the digital back from the camera the
shutter curtain will automatically open and the mirror will go into the upright
position, effectively locking the camera. When reattaching the digital back, the
mirror and shutter will return to the set position and the camera becomes unlocked
and ready for use.
When batteries are not inserted in the camera body, the shutter cannot be
released.
1. Align the lower contact pins of the digital
back with the lower contact pins on the camera
body.
Attaching and Detaching a Digital Back
Attachment
1. First remove the protective covers from the
camera body and digital back.
The ZD digital back's removal lock release lever
is made to slide in the direction of an arrow, and
if the digital back is pulled to the front, pushing
in a digital back removal button inside, it will
separate. With the M series digital back, a
button on the left side of the body needs to be
pressed in order to detach the protective cover.
2. Remove the camera rear cap by putting a
finger into the notch and sliding the cap down.
Before attachment
This manual explains the method for attaching and detaching ZD digital backs and
M series digital backs. For attaching and detaching backs from other makers,
please refer to their instruction manuals.