Mami HomeGuard 32, Быстрый старт

Страница: 9 / 16

Enter Zones (1-8)
Z
0 # 0 A 0 1 0
Set the Arm Levels A,B,C and D
The user must key in the user code followed by ‘0' then the level A,
B, C or D. the user must select active zones (
zones 1 to 8 ).
Once the user enters the active Zones associated with that level
the user then enters the hash key saving the Zones to that level.
Save Changes #
0 B
/ /
0 C 0 D
/
If the user enters an invalid Zone, it will be ignored.
The active zones on the level will be displayed, inactive zones will
be displayed as a blank.
1, ,3, , ,6, ,8
Edit Level - A
NOTE: THIS OPERATION WILL ERASE
ALL PRESENT DETECTORS ALLOCATED TO
THE ZONE CHOSEN.
!
0 # 2 1 0 1 0
Clearing Devices in a Zone
The user is prompted to enter the Zone to clear devices. Only the
Zone entered will be cleared. Note. only one zone at a time may be
erased
If the user wishes to exit, the user simply pushes the hash key instead.
The user is then prompted that the zone has been cleared and the
operation is complete.
Z
Enter Zones (1-8)
EXIT
#
0 # 2 2 0 1 0
Clearing Remote Controls
The user is prompted to clear the remote’s. To continue the user
pushes the star key.
If the user wishes to exit, the user simply pushes the hash “#” key instead.
The user is then prompted that the Remote Controls have been cleared.
EXIT #
NOTE: THIS OPERATION WILL ERASE
ALL PRESENTLY STORED REMOTE
CONTROLS ALLOCATED TO THE UNIT.
!
*
ENTER * TO
CONTINUE
0 # 2
9
0
1
0
Defaulting The Entire System
The user is asked to Reset to factory settings. To continue the user pushes
the star key.
If the user wishes to exit, the user simply pushes the hash key instead.
The user is then prompted that the System has been Reset to default settings.
*
ENTER * TO
CONTINUE
EXIT
#
NOTE: THIS OPERATION WILL ERASE
ALL PRESENT SETTINGS TO DEFAULT. ALL
ALLOCATED DEVICES AND REMOTE’S WILL
BE CLEARED AS WELL.
!
PROGRAM THE PRESET ARM LEVELS A,B,C and D
CLEANING UP !!
M000078 P7