Mami HomeGuard 32, Быстрый старт

Страница: 6 / 16

POWER ON
0 # 0 0 0 1 0
How to switch the unit ON
Push and hold both 7 and 9 keys until power comes ON and
both LEDs and display are illuminated
Please note that in Power Down Mode the unit will not be able
to receive any radio signal.
7
9
+
Enter the User code followed by the 0,0 keys .The unit will display
“
Power Down ” and then be switched off.
POWER OFF
How to turn your HOME GUARD 32 ON or OFF
How to switch the unit OFF
0 # 0 2 0 1 0
Accessing the system Options
“Options” will be displayed. If the user wishes, the user could adjust any one of the following by entering the
corresponding keys:
Set the Schedules ON or OFF
0 # 0 2 0 1 0 3
“Schedule Bypass” will be displayed. The user may then enter
1 or 0 to toggle the Schedules on or off respectively. Schedules
will be bypassed for only one day.
Press the # key to save settings and exit
1
0
Schedules enabled
Schedule disabled
Save Changes
#
0 # 0
2
0 1 0
Set the Transmitter >Receiver Interface
2
“Tracer mode” will be displayed. The user has the option of
making the HOMEGUARD 32 compatible with either the
Advisor (remote wireless alarm indicator) or with MAMI Tracer
Alarm panels.
1
Tracer mode
Save Changes
#
0
Advisor mode
Set the Buzzer option
0 # 0 2 0 1 0 1
“Buzzer” will be displayed. The user may then enter 1 or 0 to
toggle the buzzer on or off respectively.
Press the # key to save settings and exit
1
0
BUZZER ON
BUZZER OFF
Save Changes #
NOTE: Schedule OFF option only bypasses the Schedule for 1 day, to disable the Schedule follow
instructions under setting schedules.
System programmable OPTIONS
FACTORY DEFAULT
"USER CODE"
= 1 0 0 0
0 # 0 1 0
The programming mode is where the user sets the OPTIONS and change the
operation of the unit to suit specific needs.
Programming mode is accessed by
entering the correct password followed by the hash “#” Key.
“Programming Mode” will be displayed on the LCD display. Once in programming
mode the user can select/change any of the features listed below.
NOTE: THE HOME GUARD IS ORIGINALLY PROGRAMMED WITH A "FACTORY DEFAULT"
SET OF OPTIONS. ALTHOUGH THE "FACTORY" OPTIONS REFLECT THE CHOICE
OF THE MAJORITY OF INSTALLERS AND END-USERS, PROPER OPERATION AND
COMPLIANCE WITH SPECIFIC REQUIREMENTS CAN BE ACHIEVED THROUGH RE-PROGRAMMING.
PROGRAMMING THE HOME GUARD 32
M000078 P4