Malyan S100 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

Malyan S100 Скачать руководство пользователя страница 8

8

3. Copy the generated file onto the SD card that came with your printer. Turn off the

printer, insert the SD card, and turn the power back on. Upon turning the printer back

on, the file will be detected on the SD card and will configure your printer to connect to

the SSID and Password provided in step 2.

Please note, this printer is designed to use a 2.4 GHz network band. Additionally,

please ensure that the printer is placed in a location with a strong Wi-Fi network

signal.

To change the network in the future, repeat step 2.

4. Upon completion, the below screen will display. The file that was loaded onto your

SD card is automatically deleted. If your printer fails to connect to your network:

Verify that the SSID and Password for your Wi-Fi network is accurate and repeat

step 2 forward.

Verify that the printer is in a location with a strong Wi-Fi signal.

Verify that the network you are attempting to connect to is a 2.4 GHz band network,

and not a 5 GHz band.

5. Wi-Fi is not mandatory to use the 3d printer. You are able to transfer files via SD

card.

«
...
6
7
8
9
10
...
»

Содержание S100





















Отзывы:

Нет отзывов