7
2. Printing status
3. Printed layers/Total layers progress
4. Adjust the cure time of the base three layers
5. Adjust the cure time for layers other than the first three base layers
6. Adjust the raise distance
7. Pause the printing
8. Printed height/Total height progress
9. Cancel the print
Finish Screen
1. Print the same model again
2. Back to the main menu
WIFI Setup
1. The below screen will be shown upon powering on your printer.
2. Enter the provided URL into your computer’s browser: http://bit.ly/linksla. While on
the http://bit.ly/linksla web page on your computer’s browser, enter the SSID and
Password for your Wi-Fi network. This will create and download a file which provides
the information for the printer to connect to your Wi-Fi network.