Malvern Zetasizer Nano Series, Руководство пользователя

Страница: 122 / 256

Creating an SOP
To create a new SOP, select Configure-New SOP . This will open up the SOP
creation wizard. The SOP creation wizard consists of several dialogues that can be
stepped through by using the
Next button.
Most of the SOP dialogues are common for all measurement types; these are
identified in the All SOPs section. Other SOP dialogues are
unique to the
measurement type selected and are discussed in individual Size , Molecular
weight , Zeta potential , Trend and Protein melting point SOP sections.
The SOP dialogues available are:
Measurement type
Allows selection of the type of measurement that the SOP will perform, i.e.
Size, Protein melting point, Zeta potential, Molecular weight or Trend.
Labels
This dialogue allows the measurement record to be named. All
measurements made using this SOP are given the sample name entered in
the SOP by default, but you can give an option to change this when you
make the measurement. Information can be entered in the
General notes
box, such as a batch number.
This is a common dialogue for all SOPs .
Instructions
Enables instructions on preparing and measuring the sample to be shown
before and after each measurement. This dialogue is not available when
performing a manual measurement.
This is a common dialogue for all SOPs .
Cell
This dialogue allows selection of the cell that will be used.
This is a common dialogue for all SOPs .
Sample
This dialogue allows the physical properties of the sample that will be
measured, to be set. The refractive index and viscosity can be entered for
both the material and dispersant used.
This is a common dialogue for all SOPs with unique features dependent
upon the measurement type.
C H A P T E R 9
Z e t a s i z e r N a n o S e r i e s
P a g e 9 . 2
M A N 0 3 1 7