How to use the machine
1. Before use, wash the accessories by clean water, rinse and dry.
2. Place the machine on a flat, clean and dry table, Press the head of the machine, turn again (
or press
down
) the head-up knob (2) Step1, the upper body will lift up automatically. (PG 1 & 2).
3. Install the pot cover into the stirring end Step2. of the machine as per PG2
4. Weigh the food and water to be processed into the mixing bowl, then assemble the mixing bowl (4)
on the machine step 3, rotate clockwise until the buckle is screwed in and locked step 4; (PG3)
5. Do not exceed the amount of dough - the total weight can hold up to 2.25kg;
6. Install the required accessories (5), (6) and (7) (only one of the three can be used at a time) onto the
head mixing output shaft (1) step 5, push the accessories to the top, and then turn a quarter turn
counter-clockwise to the locking position step 6; (PG4&5)
7. Press the head of the machine, the machine will automatically lock the head button (2) step 7, which
is in the horizontal position; (PG6)
。
8. Control speed knob (3) to the position of 0 to make the appliance stop.
9. then plug in the plug and turn on the power switch.
10. Control speed knob (3) to the required speed - start mixing;
11. After the dough meets the requirements, turn the speed knob (3) back to gear 0 to finish.
12. Press the head of the machine by hand, rotate the lifting knob (2) clockwise, lift the upper body,
rotate the mixing bowl counter-clockwise, remove the mixing bowl and take out the dough.
14/ 32
