Malsch AURA Скачать руководство пользователя страница 26

26 

|

Drives cannot 
be operated 
using the hand 
controller

Mains cable is not 
plugged in

Plug in the 
mains cable

Socket not live

Check socket

Cable plug con-
nection not firmly 
connected

Check plug con-
nections on the 
motor and hand 
controller

Hand controller or 
drive is faulty

Inform the op-
erator, specialist 
retailer or Betten 
Malsch GmbH

Mains cut-off not 
activated 

(only for 

ICS control units)

Activate the mains 
cut-off by pressing 
the green button

Functions locked 
on the hand 
controller

Enable functions 
on the hand 
controller

Motorised ad-
justment system 
is not functioning 
properly

There is an 
obstruction in the 
adjustment area

Check moving 
parts and remove 
any obstructions

The safe working 
load has been 
exceeded

Reduce the load

Drives cut out af-
ter a long period 
of operation

The adjustment 
time or safe 
working load has 
been exceeded 
and the control 
unit has reacted to 
overheating

Allow the drive 
system to cool 
down sufficiently.

Opposite function 
activates when 
operating the 
hand controller 
buttons

Motor plugs have 
been mixed up

Check that the 
cables are con-
nected correctly 
or inform your op-
erator, specialist 
retailer or Betten 
Malsch GmbH

The side rails 
can no longer be 
properly adjusted

The mechanism is 
obstructed or bent

Check all moving 
parts and remove 
any obstructions, 
or contact our 
customer service 
team

Castors do not 
brake or cannot 
be rolled

Obstructions have 
become trapped 
in the castors

Remove obstruc-
tions

The castor system 
is faulty

Contact our 
customer service 
team

T R O U B L E S H O O T I N G

Содержание AURA

































Отзывы: