Malsch AURA, Инструкция по эксплуатации

Страница: 16 / 32

16 |
Press the S1 button on the hand controller again to reactivate
electrical back rest adjustment.
Caution! Before pressing the le-
ver, ensure that there are no objects or
parts of the body below the back rest.
Manually relieve the weight on the back rest
during adjustment to prevent it falling in an un-
controlled manner.
Upper leg section
Use the corresponding buttons on the hand controller to adjust
the upper leg section.
(Upper leg section operating buttons)
For safety reasons, this position must only be adjusted by med-
ical personnel.
The horizontal position of the lower leg section can be adjust-
ed by care staff using the finely notched bracket. (extended
leg elevation)
D E S C R I P T I O N O F F U N C T I O N
Depending on the design and type of care bed, the bed can
be put into the following positions by adjusting the back rest,
the upper leg section, the lower leg section and the height of
the bed:
Back rest
Use the corresponding buttons on the hand controller to adjust
the back rest.
(Back rest operating buttons)
When raised, the back rest can be adjusted by 120 mm over
its usual length to the head board.
This function (mattress compensation) allows the occupant to
sit in a comfortable position without compressing or restricting
the stomach or upper body.
Mechanical backrest
release/CPR
( option a l )
When operating the mechanical re-
lease, hold the backrest firmly in the
current position and, if possible, re-
lieve some of the load. Pull the re-
lease to disengage the backrest and
lower it manually into the end position.