Malsch AURA, Инструкция по эксплуатации

Страница: 21 / 32

| 21
Integrated bed extension
The reclining surface of the Aura can be extended by up to
20 cm without tools and without compromising its appear-
ance.
This function is activated in three stages and without tools us-
ing the two locking bolts at the bottom foot end of the reclining
surface:
1. Pull both locking bolts upwards and then turn to the right
until they engage. The bed extension is now unlocked.
2. Reach below the foot board and carefully pull out the
bed extension by approx. 10 cm or 20 cm.
3. Finally, turn the locking bolts back to their original po-
sitions. Push the bed extension back carefully until the
mechanism engages.
Caution! A mattress insert (accessory) must be
used with 20 cm extensions. To use a mattress
insert, first pull the bed extension out as far
as it will go. Continue as described in point 3
after positioning the insert.
Caution! The reclining surface extension must
only be activated by authorised specialist staff.
Caution! For reasons of safety, it is essential to
replace existing safety elements and attach-
ments if the reclining surface extension is acti-
vated on beds with full-length side rails!
1.
2.
3.