MPG460XT
800-295-0042 ext 206
6
5. Slide the clip nut onto
the hole in the top of the
short tongue. Note, these
two parts are symetrical
so it doesn’t matter which
way they are turned. Slide
the short tongue inside the
tongue support and install a
bolt and washer hand tight
only. Flip the assembly over
so the bolt is on the bottom.
6. Set the assembly inside the
frame and slide it forward in
between the frame rails until the
holes all come into alignment.
7. Push the retractable tongue box onto the frame and slide it rearward to engage its notch inside
the tongue support. Install 1/2” bolts with washers on both sides, the forward 1/2” bolt getting a
crush preventer tube inside the short tongue.
Hand tight both 1/2” bolts with washers on
both sides.
800-295-0042 ext.215
