Malmet Blanket Warming Cabinet
Operation, Maintenance and Installation Manual
Issue 20
Page
2
Jun-23
Foreword
To obtain maximum life and efficiency from your Malmet Warming Cabinet and to ensure safe operation, please read
this manual thoroughly and follow all instructions before operating the device.
This manual provides information on the operation of the device. It is recommended that all persons operating the
device have access to this manual for training purposes.
This device is not intended for use by any person without the proper training, experience or knowledge.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The specifications supplied in this manual were in effect at the time of publication. However, owing to Malmet
(Australia)’s policy of continuous improvement, changes to these specifications may be made at any time without
notice on the part of Malmet (Australia) Pty Ltd.
Certifications and Compliances
ARTG Registration Number:
289497 Class 1
Electrical Safety:
Certificate of Suitability SAA210223 to AS/NZS 60335.1:2020
EMC compliant:
IEC 60601-1-2 Emission
Quality Policy
Malmet’s quality management system is certified to ISO 13485:2016 and ISO 9001:2015 and guarantees the qua
lity
of this product.
Important Warranty Reminder
Should you have any problems with your device, contact the company from whom you purchased it, or Malmet
(Australia) Pty Ltd.
It is important that the name from whom you purchased your device and the name of the installer are recorded
on the front page of this manual. The installer is responsible for the correct installation, start up and
demonstrating the operation of this device. They are also responsible for issuing relevant certificates of
compliance (these may differ from state to state).
Malmet Head Office and Factory Contact Details
Malmet (Australia) Pty Ltd
9-11 McKay Avenue
PO Box 373
LEETON NSW 2705
Telephone: +61 2 6953 7677
E-mail:
Website: