manualshive.com logo in svg
background image

Malmet Blanket Warming Cabinet

 

Operation, Maintenance and Installation Manual 

Issue 20 

Page

 18 

Jun-23 

 

Malmet have a Warranty Claim Procedure that is fair to our customers and provides an efficient system of 
replacement and/or repair of faulty parts. If at any time you believe we are not meeting our commitment to you 
please contact Malmet Head Office via email

[email protected]

  

 

To the extent permitted by law, no responsibility will be accepted for outside elements including, but not limited 
to storms, pest and vermin that may cause damage to the device. 

 

To the extent permitted by law, no responsibility will be accepted for damage incurred as a result of, or incidental 
to, electrical surges or brown outs or for any other consequential damages. 

 

If there is no certificate of compliance for plumbing or electrical, Malmet reserves the right to refuse service on 
non-compliant installations. 

 

To the extent permitted by law, claims for damage to contents, carpet, ceilings, foundations or any other 
consequential loss either direct or indirect resulting from, power spikes, incorrect operation, incorrect installation, 
faulty product or any other cause, are excluded. 

 

This warranty, and to the extent permitted by law, any warranties owed by Malmet under the Australian 
Consumer Law or other applicable legislation, are not transferrable and cannot be sold, assigned or transferred in 
any other way from the purchaser to any other person. 

 

To the extent permitted by law, unauthorised use of any parts that were not supplied or approved for use in the 
applicable device by Malmet will result in this warranty and any warranty claims applicable to that device being 
void. 

 

Warranty labour (service work) shall not include devices located outside of city metropolitan areas of Melbourne, 
Sydney, Adelaide, Perth and Brisbane. Costs outside these areas shall be borne by the owner. The owner shall be 
notified of this prior to the warranty call out. 

 

Warranty labour (service work) shall be performed during normal business hours (Monday 

 Friday 7am 

 4pm), 

excluding public holidays. 

 

Warranty labour (service work) performed outside of normal business hours, shall be 

charged at Malmet’s or its 

authorised representative or agent’s standard after

-hour labour rates. 

 

Warranty relating to spare parts covers parts only and does not include any associated labour costs. 

To the extent permitted by law, a charge will be made for work done or a service call made where: 

 

There is no fault apparent with the device, as determined by Malmet or its authorised representative or agent 
acting reasonably. 

 

The defective operation of the device is due to failure of electricity or water supply. 

 

Defects are caused by neglect, incorrect application, abuse or by accidental damage of the device. 

 

An unauthorised person has attempted to repair the device. 

 

Harsh environmental situations including, but not limited to, water quality that may cause the water tank damage 
cannot be covered under this warranty 

 

 

Содержание B105BT






















Отзывы: