MAKSIWA CBC.T, Инструкция по эксплуатации

Страница: 22 / 80

22
5 Operation
Change Cutters
1. Take off the cover.
2. Use spanner to loosen the grains which lock the gib of the knife. Take out the gib and the knife.
3. Change the knife and put it back on the gib.
4. Clean the cutter head slot and position the gib knife.
5.
Put the knife into the position, tighten the fixing grain.
6. Repeat the change all 4 knives to the top cutter head and bottom cutter head.
5.8 Buffing Unit
The buffing unit is designed to polish edges and maintain their natural colors. Two independent
buffing wheels for cleaning and polishing can be adjusted to a particular angle to maximize its effect
for better workpiece finishing and extending buffing wheel service life.
Adjustment Top Buffer
1. Loosen locking screw A.
2.
Position and /or tilt the buffer to the desired
position.
3. Once reached desired position tighten the
screw A (for upper buffer)/ screw B (for lower
buffer).