MAKSIWA CBC.T, Инструкция по эксплуатации

Страница: 5 / 80

5
• Always wear safety glasses, face protection, safety anti-slip shoes, and ear protection to reduce
personal injury.
• Always wear safety glasses, face protection, safety anti-slip shoes, and ear protection to reduce
personal injury.
• Do not wear loose clothing, gloves, chains, rings, bracelets or other accessories. It is also
recommended to use hair protection.
• Do not over stretch to reach. Keep balanced and feet firmly planted at all times.
• Disconnect the machine from the power supply before servicing or performing repairs.
•
Reduce the risk of unintended starts by making sure that the main power switch is turned off
before plugging the cord into the outlet.
• Use recommended accessories. Refer to the instruction manual to check the recommended
accessories. Improper use of the accessories may cause personal injury.
• Never stand on the machine. serious accidents can occur if the machine is tilted.
• Your safety is your responsibility. Serious risks are involved when working with machinery.
• Always focus on the job, do not operate machine when tired.
• Never use in dangerous environment such as in damp, wet location, or expose under the rain.
• Never leave machine running without attention.
• Never open the protection cover while the machine is still running.
• The machine operator must not be younger than the minimum age established by legislation
and must also be fully qualified to work with this machine.
• Many accidents are caused by appropriate clothing and personal objects (i.e. bracelets, watches,
necklaces etc.). Make sure that buttons are securely fastened.
• Do not wear ties and tie back long hair.
• Wear approved footwear and safety glasses for your eyes at all time.
• The machine and working area around it must always be kept clean, keep well lighted and
ventilation.
• The use of safety devices is obligatory and must never be removed, modified or damaged. The
manufacturer declines all responsibility if safety devices are modified in any way.
• In exceptional working conditions the safety devices provided with the machine may be
insufficient. It is your responsibility to make and fit the necessary additional safety devices.
• All work on electrical components must be carried out by a qualified electrician.
• All maintenance work must be carried out with the machine switched off, padlocked, the
compressed air tube disconnected from the fast Snap-on fitting.
• Use only cutting tools in good condition. In any case avoid using a hammer. Screws, nuts and
bolts must be tightened with a proportional strength, neither too slack nor too tight. Use only
the tools given just as they are without altering their strength.
1 Safety Regulations