background image

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

ST113D

Staple width

10 mm

Applicable staples length

7 mm - 10 mm

Staple magazine capacity

150 pcs

Dimensions without hook (L x W x H)

211 mm x 81 mm x 159 mm

Rated voltage

D.C. 10.8 V - 12 V max

Battery cartridge

BL1015, BL1016, BL1020B, 

BL1021B

BL1040B, BL1041B

Net weight

1.3 kg

1.5 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications and battery cartridge may differ from country to country.

• 

Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

The tool is intended for pressing staples into construc-

tion materials such as timbers.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (L

pA

) : 75 dB(A)

Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).

WARNING:

 

Wear ear protection.

Vibration

The vibration total value determined according to EN60745:

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration emission value has been 

measured in accordance with the standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration emission value may 

also be used in a preliminary assessment of exposure.

WARNING:

 The vibration emission during actual 

use of the power tool can differ from the declared emission 

value depending on the ways in which the tool is used.

WARNING:

 Be sure to identify safety measures to pro-

tect the operator that are based on an estimation of exposure 

in the actual conditions of use (taking account of all parts of the 

operating cycle such as the times when the tool is switched off 

and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

 

Read all safety warnings, instruc-

tions, illustrations and specifications provided with this 

power tool.

 Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury.

Save all warnings and instruc

-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless stapler safety warnings

1. 

Always assume that the tool contains fasten

-

ers.

 Careless handling of the stapler can result in 

unexpected firing of fasteners and personal injury.

2. 

Do not point the tool towards yourself or any

-

one nearby.

 Unexpected triggering will discharge 

the fastener causing an injury.

3. 

Do not actuate the tool unless the tool is 

placed firmly against the workpiece.

 If the tool 

is not in contact with the workpiece, the fastener 

may be deflected away from your target.

4. 

Disconnect the tool from the power source 

when the fastener jams in the tool.

 While 

removing a jammed fastener, the stapler may be 

accidentally activated if it is plugged in.

5. 

Use caution while removing a jammed fas

-

tener.

 The mechanism may be under compression 

and the fastener may be forcefully discharged 

while attempting to free a jammed condition.

6. 

Do not use this stapler for fastening electrical 

cables.

 It is not designed for electric cable instal-

lation and may damage the insulation of electric 

cables thereby causing electric shock or fire 

hazards.

Содержание ST113DZJ





























































Отзывы: