![background image](http://html.mh-extra.com/html/makita/js1300/js1300_instruction-manual_1722769005.webp)
5
Removing shear blades
1
2
3
4
5
6
004689
Remove the three screws which hold the cutting head.
When removing the second screw, be careful not to fall
the sleeve. Then the blades can be removed easily.
When removing the blades, hold the blades and the
sleeve so that they do not fall from the cutting head.
Installing shear blades
1
2
3
4
5
6
004690
Install the sleeve and tighten the three screws after
inserting the center blade, side blade L & R into the
cutting head. In this process, the screw heads should be
protruding 2 - 3 mm (1/16"-1/8") from the cutting head
surface.
If you will tighten the screws excessively, the cutting
head cannot be installed to the tool.
Installing cutting head
1
2
3
4
004691
CAUTION:
•
Secure the cutting head firmly. Otherwise it can
rotate during operation and can cause serious
injury.
Insert the cutting head into the tool with turning it left and
right alternately. Then tighten the three screws with the
hex wrench.
OPERATION
CAUTION:
•
Edges and chips of the workpiece are sharp. Wear
gloves. Otherwise it can cause injury.
Secure the workpiece firmly. Move the tool forward
keeping the side blades flush with the workpiece surface.
1
2
3
4
004697
Adjusting shear blade
1
2
3
4
5
004698
Adjust the side blade L so that the curl of waste material
does not contact the cutting head or the workpiece. Use
the hex wrench to loosen the three screws which hold the
cutting head. Move the side blade L back and forth to
adjust it. Then tighten the three screws with the hex
wrench.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may
result.
1. Screws
2. Side blade L
3. Center blade
4. Side blade R
5. Sleeve
1. Side blade
surface
2. Side blades
3. Center blade
4. Workpiece
1. Cutting head
2. Screws
3. Tighten
4. Hex wrench
1. Cutting head
2. Sleeve
3. Side blade R
4. Center blade
5. Side blade L
6. Screws
1. Screws
2. Side blade L
3. Center blade
4. Side blade R
5. Sleeve
6. Cutting head
Содержание JS1300
Страница 19: ...19 ...