6
English
Q
Carefully switch the tool on.
Make sure that the nozzle always
points away from you and any
bystanders.
Make sure not to drop anything into
the nozzle.
Cooling down
The nozzle and accessory become very hot during use.
Let them cool down before attempting to move or store
the tool.
Q
To reduce the cooling time, switch the tool on at
the lowest air temperature setting and let it run for
a few minutes.
Q
Switch the tool off and let it cool down for at least
30 minutes. Always place it vertical and standing.
When the inside of heat gun gets too
hot, the indication on the LCD blinks.
In that case, set the slide switch to
position 1 to cool down the tool.
After cooling down fully, restart the
operation.
If the LCD still blinks after the restart,
contact your local Makita Service
Center.
MAINTENANCE AND CLEANING
Attention:
Before performing any
work on the equipment, pull the
power plug.
Maintenance
Q
Your Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular
cleaning.
Q
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Lubrication
Q
Your power tool requires no additional lubrication.
Cleaning
Q
To prevent overheating of the motor, keep the
ventilation slots of the machine clean and free
from dust and dirt.
Q
Regularly clean the machine housing with a soft
cloth, preferably after each use. If the dirt does not
come off use a soft cloth moistened with soapy
water.
Never use solvents such as petrol,
alcohol, ammonia water, etc. These
solvents may damage the plastic
parts.
TECHNICAL DATA
Model No:
HG6531C
HG6530V
Voltage:
120V~
120V~
Current:
14A
14A
Setting:
I
II
I
II
III
Temperature:[°C]
50
50-650
50
50-650 50-650
[°F]
122
122-1202
122
122-1202 122-1202
Setting:
I
II
I
II
II
Air flow:
[L/M] 200-550 200-550
500
280
550
[CFM]
7-19
7-19
18
10
19
Overall length
257mm
257mm
Net weight
0.71kg
0.72kg
Default setting of the preset mode
No.
Application name
Temperature Air volume
1
FREE SET 1
250°C
5
2
FREE SET 2
500°C
5
3
SCRINKING
300°C
3
4
FORMING
250°C
4
5
SOLDERING COPPER
650°C
3
6
DRYING PAINT
650°C
5
7
PAINT STRIPPING
450°C
5
8
WELDING FLOOR FOIL
450°C
3
9
WELDING PPEPDM
280°C
3
10
WELDING HDPE
300°C
3
11
WELDING PP
320°C
3
12
WELDING PVC-U
340°C
3
13
WELDING ABS
360°C
3
14
WELDING PC
380°C
3
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
Subject to change without notice.
