12 ENGLISH
Hex wrench storage
For DUN600L
When not in use, store the hex wrench as illustrated to
keep it from being lost.
1
2
►
1.
Handle
2.
Hex wrench
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
When replacing the shear blades,
always wear gloves so that your hands do not
directly contact the blades.
Installing the handle
For DUN600L
1.
Attach the upper and lower clamps on the damper.
2.
Put the handle on the upper clamp and fix it with
bolts as illustrated.
1
2
3
4
5
►
1.
Bolt
2.
Handle
3.
Upper clamp
4.
Damper
5.
Lower clamp
Installing or removing the shear
blades
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
NOTICE:
When replacing the shear blades, do
not wipe off grease from the gear and crank.
NOTICE:
For DUN500W
Do not install 600 mm shear blades to your tool.
If 600 mm shear blades are installed to the tool, you
cannot fold the head of the tool.
NOTE:
For DUN500W
Before installing or removing the shear blades, unfold
the head of the tool so that the head is straight to the
tool body.
1.
Place the tool upside down, and then remove 6
bolts.
1
►
1.
Bolt
2.
Remove the cover, gasket, plate A, and plate B.
2
1
3
4
►
1.
Cover
2.
Gasket
3.
Plate A
4.
Plate B
NOTE:
The gasket or plates may remain on the cover.