Makita DUC256, Инструкция по эксплуатации

Страница: 14 / 207

14 ENGLISH
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
WARNING:
The noise emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in
which the tool is used especially what kind of
workpiece is processed.
WARNING:
Be sure to identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN ISO 11681-2:
Model DUC256
Work mode: cutting wood
Vibration emission (a
h,W
) : 3.2 m/s
2
Uncertainty (K) : 1.5 m/s 2
Model DUC306
Work mode: cutting wood
Vibration emission (a
h,W
) : 3.2 m/s 2
Uncertainty (K) : 1.5 m/s 2
Model DUC356
Work mode: cutting wood
Vibration emission (a
h,W
) : 3.2 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DUC406
Work mode: cutting wood
Vibration emission (a
h,W
) : 3.2 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DUC256C
Work mode: cutting wood
Vibration emission (a
h,W
) : 2.5 m/s 2 or less
Uncertainty (K) : 1.5 m/s 2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in
electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Chain saw safety
warnings
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything.
A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the
saw chain.
2. Always hold the chain saw with your right
hand on the top handle and your left hand on
the front handle.
Holding the chain saw with a
reversed hand configuration
increases the risk of
personal injury and should
never be done.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of
exposure.