![background image](http://html1.mh-extra.com/html/makita/djr187/djr187_technical-information_3907040022.webp)
Fig. 7-3
Inner
wall B
Rib G
Put the lead wires of LED circuit between
Motor housing and the inner wall B.
Put the lead wires of LED circuit more toward
Handle R side than the rib G.
Switch
Handle L
Noise suppressor
Inner
wall A Connector
Rib D
Rib E
Boss B
Motor housing
Put Closed end splices in this
space, do not put it on the rib H,
the boos B and the connector.
Rib F
Terminal
Put the flag receptacle
from Switch with its lead
wires facing Handle L
side.
Put the lead wires of
Switch between the rib B
and the rib C.
Rib C
Rib B
·
Put Noise suppressor with
Noise suppressor lead wire
(white) positioned over
Noise suppressor lead wire
(black).
·
Put Noise suppressor
between the rib C and the
inner wall A.
·
Put the following lead wires between the rib B and the rib D.
- the lead wires of Terminal
- the lead wires of LED circuit
- the lead wires of Stator
·
Put the lead wires (Orange, white) of Stator under the lead wires of Terminal.
·
Put the lead wires of Stator and LED circuit
between the rib E and the rib F.
·
Put the lead wires of Stator with tube under
the lead wires of Terminal and Stator.
Rib H
Wiring to Handle
22 / 24