![background image](http://html1.mh-extra.com/html/makita/djr187/djr187_technical-information_3907040019.webp)
5-4-2
Assembling
[3] If LED circuit is removed, be sure to assemble it again.
5-5
Slider section
5-5-1
Disassembling
[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove Slider assembly. (Refer to 5-2 Slider assembly.)
[3] Remove Rotor ass'y (Armature ass'y). (Refer to 5-3 Rotor ass'y (Armature ass'y).)
[4] Remove Gear complete. (Refer to 5-4 Gear complete.)
5-5-2
Assembling
Fig. 5-4-2-2
[2] Assemble Felt 16x16 between Slider guide complete
and Gear housing L assembly, and push it in the
direction of the arrow.
Fig. 5-4-2-1
[1] Insert the longer part of Shoulder pin 6-8 into Gear
housing L assembly.
Note:
For DJR186
Longer part
Shoulder pin 6-8
Gear housing L
assembly
Gear housing L
assembly
Felt 16x16
Slider guide
complete
Fig. 5-5-1-1
[5] Remove Slider guide complete from Slider.
Slider
Slider guide
complete
Fig. 5-5-2-1
Assemble Slider guide complete to Slider as shown below.
Slider
Slider guide
complete
19 / 24