background image

13

ENGLISH

4.

  Insert the sponge filter between the pillars and set 

it in the original position. Make sure that each bottom 

edge of the pillar holds down the sponge filter, and 

there is no gap between the sponge filter and suction 

opening.

1

2

Fig.34

►    

1.

 Sponge filter 

2.

 Bottom edge of pillar

Wall mount for cordless cleaner

Optional accessory

NOTE:

 The screw to mount the holder is not included. 

Prepare a screw which fits with the material to screw 

into.

Attach the wall mount for cordless cleaner to a hard 
wooden wall, beam or column, where the wall mount 

for cordless cleaner can be firmly secured. Always be 

sure that the wall mount for cordless cleaner is securely 
attached before hanging the cleaner.

1

Fig.35

►    

1.

 Wall mount for cordless cleaner

CAUTION:

 

Do not hang the cleaner to the wall 

mount violently or hang other appliances than the 
cleaner.

Troubleshooting

Before asking for repairs, check the following points.

Symptom

Area to be investigated

Fixing method

Weak suction power

Is the capsule full of dust?

Empty the capsule of dust.

Is the filter clogged?

Clean or wash the filter.

Is the battery cartridge discharged?

Charge the battery cartridge.

Not working

Is the battery cartridge discharged?

Charge the battery cartridge.

Noise and vibration

Is the filter clogged?

Clean or wash the filter.

Is the nozzle, pipe or suction inlet of the 
appliance is clogged?

Remove the clogged objects in the nozzle, 

pipe or suction inlet of the appliance.

Is the nozzle/pipe inlet blocked?

Do not block the nozzle/pipe inlet.

CAUTION:

 

Do not attempt to repair the cleaner by yourself.

OPTIONAL 
ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service 
Center.
• 

Extension wand (Straight pipe)

• Nozzle
• 

Nozzle for carpet

• 

Shelf brush

• 

Sash nozzle

• 

Round brush

• 

Flexible hose

• 

Filter (non-woven cloth)

Содержание DCL284ZWX1

















Отзывы: