background image

3

ENGLISH

Intended use

The tool is intended for collecting dry dust.

SAFETY WARNINGS

Cordless cleaner safety warnings

WARNING:

 

IMPORTANT! READ CAREFULLY 

all safety warnings and all instructions BEFORE 
USE.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

1. 

Do not expose to rain. Store indoors.

2. 

Do not allow to be used as a toy. Close 
attention is necessary when used by or near 
children.

3. 

Use only as described in this manual. Use only 
manufacturer's recommended attachments.

4. 

Do not use with damaged battery. If appliance 
is not working as it should, has been dropped, 
damaged, left outdoors, or dropped into water, 
return it to a service center.

5. 

Do not handle appliance with wet hands.

6. 

Do not put any object into openings. Do not 
use with any opening blocked; keep free of 
dust, lint, hair, and anything that may reduce 

air flow.

7. 

Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts.

8. 

Turn off all controls before removing the 

battery.

9. 

Use extra care when cleaning on stairs.

10. 

Do not use to pick up flammable or combusti

-

ble liquids, such as gasoline, or use in areas 
where they may be present.

11. 

Use only the charger supplied by the manufac-
turer to recharge.

12. 

Do not pick up anything that is burning or 
smoking, such as cigarettes, matches, or hot 
ashes.

13. 

Do not use without dust bag and/or filters in 

place.

14. 

Do not charge the battery outdoors.

15. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

16. 

Use appliances only with specifically desig

-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

17. 

When (the) battery pack is not in use, keep 
it away from other metal objects, like paper 
clips, coins, keys, nails, screws or other small 
metal objects, that can make a connection 
from one terminal to another.

18. 

Under abusive conditions, liquid may be 
ejected from the battery; avoid contact. If con-

tact accidentally occurs, flush with water.

19. 

Do not use a battery pack or appliance that 

is damaged or modified.

 Damaged or modified 

batteries may exhibit unpredictable behaviour 

resulting in fire, explosion or risk of injury.

20. 

Do not expose a battery pack or appliance 

to fire or excessive temperature.

 Exposure 

to fire or temperature above 130 °C may cause 

explosion.

21. 

Follow all charging instructions and do not 
charge the battery pack or appliance outside 

the temperature range specified in the instruc

-

tions.

 Charging improperly or at temperatures 

outside the specified range may damage the 

battery and increase the risk of fire.

SAVE THESE INSTRUCTIONS.

ADDITIONAL SAFETY RULES

This appliance is intended for household use.

1. 

Read this instruction manual and the charger 
instruction manual carefully before use.

2. 

Do not pick up the following materials:

— 

Hot substances that are burning or smok-
ing (cigarettes, matches, incense sticks, 
candles, hot ashes), sparks and metal 
dust generated by cutting or grinding 
metal, etc.

— 

Flammable liquid (kerosene, gasoline, 
solvents such as benzine, thinner, etc.)

— 

Flammable material (toner, paint, spray, 
etc.)

— 

Explosive or pyrophoric substances 
(nitroglycerin, aluminum, magnesium, 
titanium, zinc, red phosphorus, yellow 
phosphorus, celluloid, etc. and their dust, 
gas or steam)

— 

Liquid, oil, wet dirt or damp garbage, 
including vomit and excreta

— 

Hard pieces with sharp edges (wood 
chips, metals, stones, glasses, nails, 
pins, razors or cutlery)

— 

Solidifying and conductive fine powder 

(metal or carbon powder)

— 

Foam like carpet cleaning agent, etc. 

(they may cause explosion or fire)

— 

Large amount of powder (flour, fire extin

-

guisher powder, etc.)

— 

Substances that cause toxic symptoms

— 

Aggressive chemicals (acid, alkali, etc.)

— 

Fine binding powder such as cement

— 

Fine particle like concrete dust

— 

Desiccants

— 

Asbestos

— 

Pesticides

Such action may cause fire, injury and/or property 

damage.
To reduce your exposure to these chemicals, 
always wear approved respiratory protection such 

as dust masks that are specially designed to filter 

out microscopic particles. Direct the exhaust air 
away from your face and body.

3. 

Stop operation immediately if you notice any-
thing abnormal.

Содержание DCL284ZWX1

















Отзывы: