background image

2

ENGLISH

WARNING

• 

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen-
sory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruc-
tion concerning use of the appliance in a safe way and understand the hazards involved.

• 

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children with-
out supervision.

• 

See the chapter “SPECIFICATIONS” for the type reference of the battery.

• 

See the section “Installing or removing battery cartridge” for how to remove or install the battery.

• 

When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local 
regulations relating to disposal of battery.

• 

If the tool is not used for a long period of time, the battery must be removed from the tool.

• 

Do not short the battery cartridge.

• 

See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance.

SPECIFICATIONS

Model:

DCL284F

Capacity

730 mL

Continuous use  
(with battery BL1830B)

1 (Quiet mode)

Approx. 38 min

2 (Normal speed mode)

Approx. 21 min

3 (High speed mode)

Approx. 15 min

4 (Max speed mode)

Approx. 8 min

Overall length (with pipe, nozzle, and battery BL1830B)

1,066 mm

Rated voltage

D.C. 18 V

Net weight

1.3 - 1.7 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

The weight does not include accessories but battery cartridge(s). The lightest and heaviest combination weight 
of the appliance and battery cartridge(s) are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / 

DC18SH / DC18WC

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING:

 

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Symbols

The followings show the symbols which may be used 
for the equipment. Be sure that you understand their 
meaning before use.

Read the instruction manual.

A representative battery applicable to this 
product.

 

Ni-MH
Li-ion

Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical 
and electronic equipment, accumulators 
and batteries may have a negative impact 
on the environment and human health.
Do not dispose of electrical and electronic 
appliances or batteries with household waste!
In accordance with the European Directive on 
waste electrical and electronic equipment and on 
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to 
national law, waste electrical equipment, batteries 
and accumulators should be stored separately 
and delivered to a separate collection point for 
municipal waste, operating in accordance with the 
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.

Содержание DCL284ZWX1

















Отзывы: