Makino EDGE-2, Руководство по предварительной установке, Страница: 96 / 120

5 - 6
('*(
3UH,QVWDOODWLRQ*XLGH
5.4 Leveling
Makino builds a highly rigid machine tool, and it’s accuracy depends on
machine level. The importance of setting and maintaining proper machine
level cannot be over-emphasized.
Rough leveling prevents a twist or other distortion from setting into the
iron. Rough level the machine and leave it sit overnight to allow the iron to
normalize before final leveling.
5.4.1 Check the Precision Level
1. Place the level on a clean flat surface that is level enough to give a
bubble reading that is not “bottomed” in the bezel.
2. Note the reading and rotate the level 180°.
- If the reading is the same as the first (bubble is in the same place,
on the same side of the bezel, from your viewing position), the level
is accurate and repeatable.
3. If the reading is different, the level needs calibration.
4. Use the adjustment screws to calibrate and recheck the level.