Makino EDGE-2, Руководство по предварительной установке, Страница: 14 / 120

1 - 2
('*(
3UH,QVWDOODWLRQ*XLGH
Prior To Installation, Operation, or Service,
Do NOT attempt to install, operate, or service this machining center until:
• You have read and understand the safety instructions contained in this
guide.
• You have read and understand all Danger, Warning, and Caution
safety labels attached to the machining center and its related equip-
ment.
• You have read and understand all technical information, including the
following sections of this safety chapter.
Questions Regarding Safe Operation
Before you operate this machine – contact your Makino service group for
answers to any questions about safety and your Makino machine.
1.2.1 Danger, Warning, Caution Statements and Symbols
It is important that all employees recognize each safety symbol on the
machine and understand the meaning of Danger, Warning, and Caution.
These safety labels must never be removed, covered, or painted over,
and must be replaced if they are damaged, defaced, or become unread-
able.
Table 1-1
presents the meaning of each safety statement. It is important
that all employees recognize and understand the meaning of the safety
symbols shown in
Table 1-2
.
The location of safety labels for specific hazards on the EDGE2 is
described in
section 1.9.4
.