Makino EDGE-2, Руководство по предварительной установке, Страница: 19 / 120

01_20ed3a Safety.fm 1 - 7
3UH,QVWDOODWLRQ*XLGH
('*(
• Obtain an MSDS for each chemical (such as cutting fluids, lubricating
oils, greases, etc.) used on or around the machining center. Practice
safe working habits and wear all protective equipment required. Know
and understand the procedures to follow in the event:
- Your skin is exposed to the chemical.
- Your eyes are contacted by the chemical.
- You ingested or inhaled the chemical.
1.4 Equipment and Operation Safety
We urge that all machining centers be operated, equipped, and cared for
in strict compliance with all local, state, and federal safety regulations. The
following safety requirements apply to all machinery and should be prac-
ticed in addition to machine specific safety guidelines.
• Do not neglect your responsibility to ensure that all machining centers
are operated, maintained, and equipped with complete regard for oper-
ator safety.
Only qualified personnel, trained in safety and all machining center func-
tions should be allowed to operate, maintain, or repair the machine.
To be considered qualified, all personnel whose duties are related to the
operation, maintenance, or repair of the machining center should:
• Know the location and operation of the [EMERGENCY] (E-Stop) but-
ton.
• Study the related guides or manuals prior to attempting to operate,
maintain, or repair the machine.
• Locate and understand all
Danger, Warning,
and
Caution
labels on the
machining center and accessories.
Machining centers are designed for operation by one person at a time.
• Persons other than the designated operator should stay out of the area
during operation.
• Unauthorized personnel may increase the potential for injury or dam-
age due to inattentiveness.