Makino EDGE-2, Руководство по предварительной установке, Страница: 17 / 120

01_20ed3a Safety.fm 1 - 5
3UH,QVWDOODWLRQ*XLGH
('*(
1.2.4 Lockout/Tagout Procedure
The machining center is powered by high voltage and other energy
sources that represent potential hazards. To reduce the risk of injury or
death establish, define, and practice a Lockout/Tagout procedure for the
equipment in your facility.
Lockout/Tagout defines a minimum safe procedure to be followed by per-
sons who might be confronted with unexpected energizing, start-up, or
release of stored energy that could cause injury or death. At a minimum,
all Lockout/Tagout procedures should include:
1. Set the machine’s Main Power switch to the Off position.
2. Affix a
DO NOT START
tag with your name and department at, on, or
near the machine’s Main Power switch, until all repairs are complete.
3. Turn the Main Power disconnect to the Off position.
4. Install an industry approved lockout device through the Main Power
disconnect handle.
5. Install a tamper-proof padlock onto the lockout device. All persons
performing maintenance on the machine at the same time shall install
their own padlock onto the lockout device.
6. Disconnect the main power of all power sources (i.e. electrical, air,
hydraulic, etc.).
Use the Lockout/Tagout policy and procedures defined by your company.
If no Lockout/Tagout procedure has been communicated to you, please
ask your supervisor to provide and explain one or obtain copies of stan-
dards to develop and implement Lockout/Tagout in your plant.
• ANSI has issued a standard to assist in the design and development of
a Lockout/Tagout policy. It is written as a guide to follow when deter-
mining the specific procedures and training necessary and appropriate
to your plant operations.
- Copies of the ANSI standard are available from ANSI at 1430
Broadway, New York, NY 10018, ask for: Standard ANSI Z244.1-
1982, or as modified, for personal protection - Lockout/Tagout Of
Energy Sources - Minimum Safety Requirements.
Electrical Shock Hazards Exist - Work Safely
Failure to turn the Main Power disconnect to the Off position, lock it out, and tag it could
result in severe personal injury or death.