MakerBot Thing-O-Matic, Быстрый старт

Страница: 12 / 31

10/24/12 2:04 PM
Loading Filament and Testing Extrusion
On the right side of the control panel, you will find a tab labeled “Stepstruder MK7.” In this tab, you can see
a realtime readout of the extruder and platform temperature, and you can set target temperatures. In the
rolling readout, the blue line is the target temperature for the extruder head, the red line is the current
temperature for the extruder head, the yellow line is the target temperature for the build platform, and the
white line is the current temperature for the build platform. To heat up the extruder, type “225” into the
“Target Temperature” box and press enter. You should see the red line start to rise.
To heat up the platform, type “120” in the “Platform Target Temperature” box and hit enter. Now, you
should see the white line start to rise.