MakerBot Thing-O-Matic, Быстрый старт

Страница: 22 / 31

10/24/12 2:04 PM
Generate Gcode
“Generate GCode” is one of the the main functions of Replicator G — this is where your 3d model will get
converted into a toolpath, which is the series of movements your MakerBot will execute while printing the
object.When the dialogue box opens, you should find the correct “Profile” that fits your machine. You should
select the “SF35 Thingomatic HBP MK7.” This profile has all the correct parameters specific to the type of
machine you are running.
The check box that says “Raft” can be off or on, depending on what you prefer. The “Raft” is an extra-thick
first layer intended to increase the adhesion between the print and the platform. It needs to be manually
removed from the print afterwards. You generally do not need a rafted print, but it’s best to use it for your
initial test prints.
The next check box is unchecked and says “Use Printomatic.” Please check this box and increase the size of
the dialogue box.
If you check the box labeled “Automatically generate when printing” then ReplicatorG will automatically re-