MakerBot Thing-O-Matic, Быстрый старт, Страница: 30 / 31

10/24/12 2:04 PM
There are 9 white buttons that do different different things depending on the mode you’re in. However, the
button in the center of the cross is usually the “do this” button, and the button second from the right on the
central row is usually the “go back” button.
You’ll see the three options after the splash screen goes away.
1) Monitor Mode
2) Build From SD
3) Jog Mode
Build From SD advances you to the next menu where you can scroll through the files on your card. Scroll
through the files with the left up and down keys; click the central button to select the file for printing.
Jog Mode will allow you to manipulate the XYZ axes; follow the on-screen interface.
Monitor mode will show you your machine’s current temperature. This is also the screen that will show
when you are printing.
Save GCode to your SD Card
To save your files onto SD, insert your SD card into a card reader, then press the “Build to File” button and
save it directly to the root folder of the card.