MakerBot Thing-O-Matic, Быстрый старт

Страница: 9 / 31

10/24/12 2:04 PM
Install Drivers
You may need to install drivers to be able to communicate with your Thing-O-Matic. To determine whether
this is necessary, start ReplicatorG with your Thing-O-Matic unplugged and look at the contents of the the
“Machine” -> “Connection (serial ports)” menu. Now plug in your Thing-O-Matic and choose “Rescan serial
ports” from that “Machine” -> “Connection (serial ports) menu. Navigate back to the list of serial ports —
you should see a new port now that your machine is plugged in. If not, follow the instructions below to
install the necessary drivers.