MakerBot Replicator, Руководство пользователя

Страница: 32 / 61

makerbot desktop software 32
print sEttings
printing tO thE MakErbOt rEpLiCatOr
4. advanced
Click
advanced
for additional options, including temperature and object strength. For information
on what the advanced settings are and how to use them, go to makerbot.com/support. You
will not need to change any advanced settings to print the Queen Anne coffee table.
5. Cancel
Click
Cancel
to return to the Prepare screen without saving changes. Any print settings you
have selected will be discarded.
6. save settings
When you are finished, click
save settings
. The current settings will be used to slice your
model next time you print or export a print file.
printing frOM MakErbOt dEsktOp
When you are ready to print the Queen Anne coffee table model, click
print
to slice the model
using the current settings and send a .makerbot print file to your MakerBot Replicator.
•
• If MakerBot Desktop is connected to your MakerBot Replicator, the print file will be
sent directly to your 3D printer. Click the control panel dial to confirm and start your print.
•
• If MakerBot Desktop is not connected to your MakerBot Replicator, this button will open
•
a dialog allowing you to save a .makerbot print file. You can transfer the print file to
your MakerBot Replicator using a USB drive or print it from your Library at a later time.
•
• Click
print preview
to open a preview of the sliced model.