MakerBot Replicator, Руководство пользователя

Страница: 22 / 61

startup 22
first stEps
Now that you’ve leveled your build plate and loaded filament into the extruder, you’re ready
to print something. The LCD panel will display some of the print files loaded onto your 3D
printer’s internal storage.
print a tEst ObjECt
1. Use the dial to highlight one of the print files.
2. Push the dial to select your chosen print.
You will be taken to a file info page.
3. Select
print
. The MakerBot Replicator
will print the file you selected.
4. When the print is finished, let it cool
before removing it from the build plate.
Caution:
Never turn off the MakerBot Replicator immediately after completing a print.
Always allow the Smart Extruder to cool before powering down.