27
M2 ASSEMBLY GUIDE
7. Change depth per pass
The safest and cleanest way to have a clean cut is to change your depth per pass to half of
your bit diameter. Here, we have a 1/4in bit, so we changed our Depth per pass to 0.125
inches. You can leave the other values as they are for now.
8. Arrange:
When you create your gcode, your M2 will start cutting your file based on where X,Y both
equal zero millimeters (0,0). You can arrange your file to start based on where you home your
M2. Either select and move all the parts of your file or click the “shape” tab in the dialog box
after selecting your model. Click the bubble in the five part matrix to choose where your M2
will start. The bottom corner of the grid is (0,0), and will correspond with where you set (0,0)
home in your Machine Control Application for your M2.
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 11.09.2020
Version 1.14
