Major 1150 Slurry Vac Скачать руководство пользователя страница 31

Страница: 31 / 89

www.major-equipment.com

E. Vacuum Pump Maintenance

How to uninstall the from the tanker:

PTO:

1. Stop the power take-off of the tractor;

2. Remove the cardan shaft from the power take-off of the rotary blades vacuum pump

3. Remove the connecting pipe that joins the rotary blades vacuum pump to the tank car, by loosening the metal

band and sliding the pipe from the adjustable elbow

4. Remove any hydraulic connections

5. Remove the clamping screws and disinstall the rotary blades vacuum pump

Pulley

1. top the power take-off of the tractor

2. Remove the driving belts.

3. Remove the pipe that connects the rotary blades vacuum pump to the tank car. To accomplish this, loosen the

metal clamp and pull the pipe out of the elbow

4. Remove any plumbing connections

5. Remove the mounting screws and remove the rotary blades vacuum pump

Hydraulic

1. S top the hydraulic system

2. Remove the hydraulic connections to the motor

3. Remove the pipe that connects the rotary blades vacuum pump to the tank car. To accomplish this, loosen the

metal clamp and pull the pipe out of the elbow

4. Remove any plumbing connections;

5. Remove the mounting screws and remove the rotary blades vacuum pump.

How to disassemble the pump - Back Assembly

MEC 1000-1600-2000-3000-4000-5000-6500-8000

Remove the back cover or the lubrication pump (together with the connector joint) from the flange;

Remove the screws from the back flange;

U se two screws for screwing into the threaded extraction holes until the flange is removed;

MEC 9000-11000-13500

Remove the rear cover or oil pump (together with the connecting joint) from the flange;

2. Remove the seeger ring from the rear pin;

Remove the screws from the rear flange.

Screw two screws into the threaded extraction holes just until the flange can be removed;

STAR - AGRI /V (with rear cast iron oil tank)

1. Remove the tank cover and the lubrication pump (together with the connector joint) from the back tank;

2. Remove the screws from the back tank;

3. U se two screws for screwing into the threaded extraction holes until the tank is removed;

STAR - AGRI /F (with rear flange and extractable side sheet oil tank)

1. Close the oil cock placet on the tank

Remove the back cover with the lubrication pump (together with the connector joint) from the flange;

Remove the screws from the back flange;

U se two screws for screwing into the threaded extraction holes until the flange is removed;

How to disassemble the pump - Front Assembly

PTO:

1. Unscrew the screws of the gearbox cover;

2. Use two screws for screwing into the threaded extraction holes until the cover is removed;

3. Remove the gear with splined shaft using an extractor if necessary;

Содержание 1150 Slurry Vac


























































































Результаты поиска

Содержание 1150 Slurry Vac

Отзывы:

Похожие инструкции для 1150 Slurry Vac

Бренды по названию

Популярные бренды

Major 1150 Slurry Vac, Руководство оператора и список запчастей

Результаты поиска

Содержание 1150 Slurry Vac

Отзывы:

Похожие инструкции для 1150 Slurry Vac

Бренды по названию

Популярные бренды