
28
www.major-equipment.com
4.
For the pinion: unscrew the selflocking nut, use an extractor;
5. Remove the seeger ring placed in front of the bearing
6. S lide the rotor from the body together with the gearbox;
7. Disassemble the rotor from the gearbox through a press;
Pulley 8000
1. Remove the driven pulley and the key;
2.
Disassemble the front cover from the flange;
3.
Remove the screws from the front flange;
4. S lide the rotor from the body;
5. Remove the seeger ring placed in front of the bearing;
6. Disassemble the rotor from the gearbox through a press;
Pulley
1. Remove the driven pulley and the key
2.
Remove the front cover from the flange
3. Remove the seeger ring from the front pin
4.
Remove the screws from the front flange
5. Pull the rotor out from the body
6.
Use a press to remove the rotor from the flange
Hydraulic
1. Disassemble the hydraulic motor from its support;
2. Remove the hydraulic motor support;
3. Remove the clamping screw located inside the sleeve and then slide the sleeve out;
4.
Remove the screws from the front flange;
5. Slide the rotor from the body;
6. Remove the seeger ring placed in front of the bearing;
7. Disassemble the rotor from the gearbox through a press;
Refitting the pump - back
IMPORTANT: Before proceeding with any re-fitting, replace the gaskets of the opened parts.
•
Always replace the [flange / pump body] or [gearbox / pump body]
fixing screws, when you restore the working conditions, as a result
of intervention of the “Crash Protection System.” Recall that this
system allows the rotor to slide vertically downward in the case
of entry of foreign material into the pump and / or breakage of the
vanes, preventing breakage of the main components.
•
Always replace flange / pump body or gearbox / pump body fixing
screws during each vanes replacement.
SERIES MEC 1000-1600-2000-3000-4000-5000-6500-8000
1.
Remove the bearing and the spacer from the back flange;
2.
Replace the flange gasket;
3.
Bring the back flange up to the pump body, aligning it with the
clamping holes;
4. Insert the 6 clamping screws in the holes and tighten them;
5.
Fit the bearing on the flange using a drift;
6. Insert the spacer;
7.
Re-fit the back cover or the lubrication pump (together with the
connector joint) on the flange.
Содержание 1150 Slurry Vac
