Major Manufacturing HIT-45, Инструкция по установке

Страница: 4 / 31

Attach the bevel blocks both top and bottom
on the inside of the HIT-45 clamp with the
supplied 10-32 x 1/2” flat head socket
screws. These blocks pick up the door bevel.
THE BLOCKS MUST BE REMOVED WHEN
DRILLING THE LOCK FUNCTION HOLES
LATER OR IF USING THIS CLAMP ON
ALUMUNUM DOORS! FAILURE TO
REMOVE THEM WILL CAUSE THE LOCK
BACKSET TO BE MIS-DRILLED.
Install the HIT-45AR5 template using the
supplied 10-32 x 1/2” long flat head socket
screws. Using a 5/8” router template guide
and a 1/2” router bit, this template will route a
1-1/4” wide x 8” tall faceplate.
Thread the pointer in the center hole of the
five tapped holes as shown.
Copyright 2008—Major Manufacturing