Major Manufacturing HIT-45 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 31

Major Manufacturing HIT-45 Скачать руководство пользователя страница 28

ANUFACTURING, INC. (714) 772-5202 FAX (714) 772-2302

HIT-45UN8 TEMPLATE GUIDE

FOR USE WITH UNICAN 8100 SERIES MORTISE LOCKS

USE MARKED HOLES AS FOLLOWS

(A) FOR UPPER LOCK MOUNTING SCREWS

Template hole size: 1/4”, drill half way from both sides of door.

(B) FOR THUMB TURN FEATURE ACTUATOR

Template hole size: 1/4”, drill to mortise pocket from both sides of door.

Enlarge hole to 1” with a hole saw after all template holes have been
drilled and HIT-45 has been removed from door.

(C) FOR KEYWAY FEATURE ACTUATOR

Template hole size: 1/4”, drill to mortise pocket from both sides of door,

Enlarge hole to 1” with a hole saw after all holes are drilled and
HIT-45 has been removed from door.

TWO OPTIONS FOR DRILLING LEVER SPINDLE

AND THRU-BOLT HOLES

OPTION #1 AS PER LOCK TEMPLATE

(D) LOCK SPINDLE AND THRU BOLT HOLES

Template hole size: 1/4”, drill to mortise pocket from both sides of door.

    Enlarge hole to 2-1/8” with a hole saw after all template holes have been
    drilled and HIT-45 has been removed from door. This hole will accept
    lock spindle and thru-bolts.

                 OPTION #2
(D)  LOCK SPINDLE AND THRU BOLT HOLES

Template hole size: 1/4”, drill to mortise pocket from both sides of door.

Enlarge hole to 2-1/8”

ON OUTSIDE OF DOOR ONLY

after all template

    Holes have been drilled and HIT-45 has been removed from door.
    Enlarge inside hole to 1” with a hole saw after all template holes have
    been drilled and HIT-45 has been removed from door. This hole will
    Accept the lock spindle only.

(E) THRU-BOLT HOLES ON INSIDE OF DOOR

Template hole size: 5/16”, drill to mortise pocket from inside of door.

After drilling all holes install lock per manufacturers directions and
check for proper operation.

VISIT OUR WEBSITE!

ALWAYS WEAR EYE AND EAR PROTECTION WHEN USING POWER TOOLS!

IMPORTANT: If using HIT-45 Clamp for faceplate routing you must remove

bevel blocks prior to drilling function holes. Failure to do so will result in

Incorrect backset.

«
...
26
27
28
29
30
...
»

Содержание HIT-45
































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды